Dedicated wifi for automation allows me to have devices such as Xiaomi Vaccuum, or security camera not phoning home. OpenWRT with good firewall rules completely isolate my “public” containers/VMs from my lan.

Server was built over time, disk by disk. I’m now aiming to buy only 12TB drives, but I got to sacrifice the first two as parity…

I just love the simplicity of snapraid / mergerfs. Even if I were to loose 3 disks (my setup allows me the loss of 2 disks), I’d only loose data that’s on these disks, not the whole array. I lost one drive once, recovery went well and was relatively easy.

I try to keep things separated and I may be running a bit too many containers/vms, but well, I got resources to spare :)

  • tuff_wizard@aussie.zoneEnglish
    51·
    1 year ago

    That’s… not all hand written is it? No one who is good at computers can write that well. We got into this BECAUSE we couldn’t write well, right?

  • Huschke@programming.devEnglish
    3·
    1 year ago

    I would never use an ISPs router for my home network. It just causes so many issues that you can easily avoid by either using your own router directly or if that is not possible putting the device into “bridge” mode and using your own router behind it.

    What are some of the issues?

    The devices the ISPs send out are usually the cheapest hardware imaginable and therefore introduce substantial unnecessary latency.

    Where I live some ISPs also used to use tools that genereted wifi passwords based on the devices MAC address. While this is apparently fixed now, a lot of non tech savvy users still use these old devices that are basically open to anyone now.

    To save even more money, they sometimes deliberately send out faulty devices (as in devices that drop connection frequently, restart for no reason, etc) which is just horrible.

    I know these issues because I worked in that field and there are a lot more unfortunately…

    • tiller@programming.devOPEnglish
      1·
      1 year ago

      WIth my previous ISP, I swapped the ISP’s router with my OpenWRT’s and everything worked fine. With my current ISP, it appears that it’s not that simple to swap the router altogether. But I’ll be honest, the biggest factors are price and number of routers/switch. As I want 2.5gbps, I’d need a router with at least dual 2.5gbps ports. The WIFI6 offering is also quite nice. And if I can’t swap my ISP router, it would just add another device. In a perfect world, I’d have a single router running openwrt, with wifi6 and couple of 2.5+gbps ports (but unfortunately openwrt doesn’t play nice with most wifi6 routers and these routers can get very expensive) For now, my ISP router does the job and I haven’t had any issue (yet)

  • Ac5000@lemm.eeEnglish
    3·
    1 year ago

    Thank you for posting this with the explanations and great visuals! I am wanting to upgrade to a setup almost identical to this and you’ve basically given me the bill of materials and task list.

    Anything you wish you had done differently or suggest changing/upgrading before I think about putting something similar together?

  • Decronym@lemmy.decronym.xyzBEnglish
    1·
    10 months ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    AP WiFi Access Point
    IP Internet Protocol
    NAT Network Address Translation
    SSD Solid State Drive mass storage

    4 acronyms in this thread; the most compressed thread commented on today has 7 acronyms.

    [Thread #100 for this sub, first seen 1st Sep 2023, 11:25] [FAQ] [Full list] [Contact] [Source code]

  • Bjornir@programming.devEnglish
    1·
    1 year ago

    That is a great quality post! Congratulations and thank you

    Your home network is not too shabby either ;)

  • Sotuanduso@lemm.eeEnglish
    0·
    1 year ago

    Hmm, nice detailed specs on your home network. Mind sharing your IP? For, uh… totally trustworthy reasons. Asking for a friend. >: )