Heyo

In the summer, I stick box-fans in the windows, pulling in nice cool air and pushing off the use of AC by a couple months

Of course, since these are cheap CT fans, all they have is a rotary dial (0-3), and no real ability to automate.

I decided to add a 3 channel controller on AliExpress

Since my goal is high WAF, everything needs to work via the orinal controls. This allowed me to still use the original rotary dial, while giving me a HA override

Installation was fine, largest annoyance was the fan was original a switched neutral. Once I figured that out, I moved to a switch hot layout, and the tested. Turned on fan… Err, fine.

Threw in shoe glue as adhesive, and wire protection, and put 'er back together

  • zueski@lemmy.zipEnglish
    2·
    13 days ago

    How did you wire this to allow the knob to override the controller safely?

    • Corhen@lemmy.worldOPEnglish
      2·
      13 days ago

      The knob connects to the controller, and the controller treats that as a command input.

      So that part just works.