He’s Morgan the Goat, he took Hugh Grant up a hill or a mountain, it’s a little contested and fuzzy.
He’s Morgan the Goat, he took Hugh Grant up a hill or a mountain, it’s a little contested and fuzzy.
Myself over NFS can have serious latency issues. Some software can’t correctly file lock over NFS too which will cause write latency or just full blown errors.
iSCSI drops however can be really really bad and cause full filesystem corruption. Also backing up iSCSI volumes can be tricky. Software will likely work better and feel happy however and underlying issues may be masked until they’re unfixable. (I had an iSCSI volume attached to vmware silently corrupt for months before it failed and lost the data even though all scrubs/checksums were good until the very least moment).
You can make your situations with with either technology, both are just as correct. Would get a touch more throughput on iSCSI simply down to the write confirmation being drive based and not filesystem locks / os based.
YMMV
I’ve had issues with this too and reverted back to rooted docker. I even tried podman and system NFS mounts that it binds too with varying issues.
It looks like you can’t actually do this with podman for varying reasons.
Power line adaptors
Link?
T1 sites typically have replicas which usually get backed up on the experiment data to work with, T2 and T3 sites then get more local working copies that dont backup and are only kept as long as they need (as long as the delete cycle works).
A small T3 is likely around 1PB of storage.
DL380 G9. Those bioses don’t support booting from PCIe at all.
They actually do but it can only be a HPE supported BootROM… anything non-HPE is ignored (weirdly, some Intel and Broadcom cards PXE boot without the HPE firmware but not all).
Most of these boards have internal USB and internal SD slots which you can boot from with any media, intact HPE sell a USB SD card raid adaptor for the usb slot. So I would recommend using SD card for this…
Surely a 1:1 emulator would just run DRM as expected and it would never know… Feels like it may stop day1 piracy via emulators but anything beyond I’m sure would be patched.
Write your own selinux module with audit2allow.
I’m not at work so I can’t find the guides I use but this looks similar https://danwalsh.livejournal.com/24750.html