Romkslrqusz

You’ve already got answers about rice so I won’t comment on that.

Once you’ve noted the corroded places, clean it by using 99% isopropyl alcohol and an ESD brush. In lieu of an ESD brush, a regular toothbrush is usually fine but best practice is to adhere to ESD protocols.

The main area you won’t be able to get to is the BGA underneath some of the ICs. To clean under there, the board would need to be put through an ultrasonic cleaner.

I usually give any wet board 24 hours to dry with a fan circulating air over it, flipping the board around the 12 hour mark. Humidity is usually 30-60% where I live.

Both, three rotations after the threads catch.

One or none bears the risk of the connector coming out crooked and bending the pins, causing a potential alignment issue on the next connection and bending them further.

Notice that it’s never people who have the mouse complaining about the port location.

A brief 1-2 minute charge nets you hours of use, it’s really not a big deal.

Bit surprised to hear that, they were able to repair a customized / engraved Wave that I’ve had for 14 years.

It saw heavy (ab)use, locking mechanism for the knife blade got stuck/damaged after I used a baton to split wood.

deleted by creator

The screenshot for the article depicts the copilot key on the “context menu” key

Is there any way to find out whether it supports SSD storage?

Have a look at the notch in the slot. SSDs will have either M key, B+M key, or very rarely just B key.

WiFi modules are A, E, or A+E

Not even just parents though.

It also punishes people who go on vacation for a week, have a power outage, get engrossed by a different game, suffer any kind of longer term medical issue, etc. There are dozens of reasons someone could stop playing for a while.

It’s really a bullying mechanic that forces players to keep playing the game for fear of losing their stuff. People should be coming back because the gameplay is fun, not because of the threat of lost progress.

The mechanic would be much more appropriate if it were tied to actual time signed in to the game. I was looking forward to this game and was already going to wait for more polish anyways, but as long as this mechanic exists in its current state I’m completely turned off of it.

France too

Mainstream supermarkets have adult sized DBZ briefs, there are still little coin-op machines that dispense DBZ figurunies

At least the replacement + tools is only about $70!

Perfect opportunity to do a shell swap too, since it’s more or less the same procedure.

As far as releasing these manuals and making parts available is concerned, we already have these laws going into effect in the US

This new system does not involve logging in to another machine with credentials. You send an invite, they accept.

1. Character creation

2. A hairstyle option that is actually a toupee. If your character is hit / impacted / falls / etc, the toupee can sometimes fall off l. The character suffers a debuff until they pick it back up or buy a new one. It is not apparent during character creation that what the player is selecting is a toupee, and the mechanic is not explained in any way.

Sunflower Oil

Five Guys is the peanut oil place

It is, Secure boot and the TPM must both be enabled.

If you check Msinfo32 / “System Information” with admin rights, there is a “device encryption” listing that maybhave additional information.

There are rare instances where a device won’t support automatic encryption due to “Un-allowed DMA capable bus/device(s) detected” which requires a registry tweak to work around

It backs up to the Microsoft Account

Still, some people create an @outlook.com email, set up no recovery options, forget the password, and find themselves locked out.

[…] device encryption will be enabled by default when you first sign in or set up a device with a Microsoft account or work / school account.

For devices with a TPM, this has literally been the case since Windows 10 1803 back in 2018.

Was a friend’s house recently when they ordered a case of beer.

It showed up 3 hours later. Delivery guy said “Sorry it took so long, I had to go home to charge my phone”

Most of HP’s printers have a “Basic Print and Scan Driver” that is listed as “For IT Professional use only” on their support page. I fear the day where HP Smart is the only option.

deleted by creator