Morrissey said if new testing of the gun showed it was working, she would recharge Baldwin.

  • FuglyDuck@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    4
    ·
    1 year ago

    The simplest and surest way is to use a clearing station. basically, they’re steel containers with… stuff… inside that the bullet slows and is caught. I’ve never been to a gun range anywhere that didn’t have one… and that model in the link is meant to be portable. For a revolver, you just dry-fire through the cylinder, and maybe an extra time or two to be sure. any live rounds would go off, and somebody would get bitched at, maybe fired… but nobody would be dead. That is, if Baldwin was running a safe set.

    Baring that, Colt .45 SAA’s are pretty easy to check. You open the loading gate, see the cartridges, so you pull them out and check the cartridges. if you want to check the entire cylinder, the process is fairly simple, and you can see that briefly in this video (which is demonstrating how to carry an antique single action revolver safely. this was the historic method of carry, by the way. And you can see why at the end of video.)

    Generally, props are all marked in a variety of ways that indicate- and obviously so, even if it’s not obvious to the camera- that they’re distinct from real. Cartridges for example are loaded with BB’s so they rattle (and frequently will have holes drilled in the side, and used primers so there’s a giant divot,) non-firing prop guns come in a large variety of differing levels of functionality, and are usually pretty obvious when you’re actively holding it.

    • joel_feila@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      And what is better, training everyone on set to tell the differences between all these kinds if bulletes and guns or have a small number of people?

      Also which one of those things was not done? The armorer is supposed to check the gun and make sure only the proper type of round is loaded.