Just a minor suggestion. When looking for something different than what you’re currently familiar with, do so in very open minded way, hopefully no looking for clones to what you were used to, but willing to experience and learn new stuff (there’s no failure, just something new that had to be learned and experienced).

I know it’s easier saying than doing…

Looking for advice on giant communities is sort of hard, and in the end you won’t know what works better for you if you don’t try it. The open mind needs to come with some time to be able to play, and enjoy during the play, so it’s not a whole series of frustrations.

On this same forum (different threads/posts/converstions) I’ve read very different recommendations. Even though Manjaro has been recently getting a lot of bad reputation because of letting some certs expire, it’s still considered an “introductory” gnu + linux distribution. I’ve also read Mint is a pretty good “introductory” gnu + linux distribution as well, specially now that ubuntu has finally shown its inclination towards its snap store, rather than the good and solid dpkg + apt, which allowed it to grow on users to where it’s currently at.

I myself prefer rolling release models for distributions, and being as vanilla as possible, to be closer to upstream as possible. However I dislike systemd, which is just a personal taste, so I don’t have a specific recommendation. It used to be Manjaro offered openrc, but they dropped it, and the distributions I know are Artix (it has gui installers if that’s considered “introduction” level distribution, but one still need to handle the configuration mismatches with upgrades as with Arch), Gentoo (I wouldn’t say it’s not for starters, but for sure it has its learning curve, but more importantly you need to be aware that it’s a source based distribution), and Void. If you don’t really care, rolling release distributions, which might have an easy ramp up might be Manjaro as mentioned, and now I believe openSUSE Tumbleweed. maybe even fedora come close… Rolling release models might come even easier for newcomers, in my opinion, since there’s no need to think on what happens on major updates, but rather one needs to keep updating periodically, but hopefully the distribution helps supporting the safest and saner configurations natively so the user, and particularly newcomer to the distribution don’t have to deal a lot to get such safe and sane configurations, at least to start with. And that’s to me the important part to call it “introductory” distribution, easy installation might be part of it, but it’s hardly the majority of it, and this is perhaps the sad part of what I like about being as vanilla as possible, some distributions even take that as a mantra for configurations, and upstream developers don’t always have the safer, or the saner configurations by default. I believe Manjaro and some others take that into account to make things smoother to start with. Maintaining the distribution, keeping it up to date, being able to install stuff, has it’s learning curve, no matter the tools/frameworks to do so, and it might be harder if one has to deal with how to make things work because the software doesn’t work as it should (configuration required upfront), and it’s not hardened enough as well so the user needs to know that and do additional configuration upfront as well.

Don’t download software from some random website.

Instead, use your package manager to install it or use something that ships with it. I would recommend Debian as its very stable and the installer gives you the option to install LXDE if you so choose. (Side note: LXDE isn’t well maintained) You likely will want to enable flatpaks for newer application support but that is pretty easy to do. Just go to flathub.org and choose how to install and then Debian

So Ubuntu has a version called Lubuntu, which used to come with LXDE, but now it comes with LXQt. So this will require you to install LXDE with the tasksel command, unless you start with Ubuntu desktopless. But I’d say to definitely check out Kubuntu, it’s the KDE version, and I feel like KDE and LXDE are quite similar. Both have an older windows overall appearance.

And even though this is lemmy, when I searched for “Ubuntu Help”, there’s no community named that. There’s also no community named “Linux help”. Which I find very very odd. Lemmy of all places you’d think would have a linux help community!

Have you been by !linuxquestions@lemmy.zip yet? Nevertheless, this community should work just as well.

There’s also !linux4noobs@programming.dev or a community with the same name on Lemmy World. When specificity in a search fails, falling back to broader/more basic terms may help (e.g. searching for Ubuntu or Linux).

I want something that’s basically like Windows 98.

Linux Mint (Cinnamon edition) and Kubuntu are, in my opinion, the two most windows-looking distros out of the box. They use the Cinnamon and KDE desktop environment respectively, you can do a little googling to see if those look like you expect your desktop to work.

Does everyone just always know what they’re doing at all times?

Fuck no, lol. I’ve done more stupid shit on Linux than windows would ever let me get away with. But Linux people tend to be a little more “tinkerers” than other computer users. Not everyone by any means, it’s really more of the other way around: if you want to tinker with your computer, Linux gives the most freedom to do so. And when you tinker enough and make enough mistakes learning experiences, you tend to pick up some knowledge along the journey.

But a lot of the modern distress are very plug-and-play, to where it’s not necessary to be a tinkerer to get going on Linux anymore.

maybe try to find a linux user group near where you live. if there is one, usually you get help there, but its usually kinda different sort of help, you don’t get “the solution” to get your personal whishes come true ready prepared in bite-sized piezes for easy consumption but just the help by advices or suggestions that those there can give you or directly would try out.

open source is about sharing knowledge and todays mainstream OS distributions are way more complicated than long ago so the learning curve to adjust things in ways the distribution didn’t prepare (which is often a lot) might be high but always worth a try at least for the learning.

for a lightweight desktop environment that is somehow similar to the old windows98, i’ld say give XFCE a try. i think on debian/ubuntu trying out could be as easy as installing the xfce (or xfce4?) package (or maybe an xfce4-desktop-environment paclage) i don’t remember the exact package name but there is one meta package that depends on all needed stuff, i did it like 4 years ago… when installed you could try it by logging in and (your distro should have a login manager that allows this, or you’ld have to change that too) choosing xfce as desktop environment at login time, thus if you don’t like it, logout again and login with the other again.

i am using xfce because it is clean, lightweight, it does its job, does not invent new unneeded features every few month (like it felt when i used kde long ago) and is adjustable enough for me. i removed the lower task bar and put the open windows components into the bar above adjustedbthat a bit, thats basically what i changed and i think it is quite similar to what win98 was (but thats not the reason for me to have it that way)

also, it is possible to change the window manager (that handles how windows are placed), the desktop manager (like task bar, application menu, maybe widges, logout buttons) and of course also one could change x.org to wayland and back without changing the other components. the login window could come from gnome project but after login one could use a complete different projects toolset.

“can” does not mean that every distro makes that an easy task. also mixing things will likely end in a fuller disk for lots of “needed” components that are maybe mostly unused. (i think i once used gnome but installed kde only for their printing dialog *lol)

when using the big distributions it is likely that no 3rd party downloads are needed to try other window managers or desktop environments, maybe search for such keywords in aptitude , apt search, or such. but new fancy stuff also often first comes from unknown 3rd party websites (or git*.com which is the same security risk as 3rd party websites) before it gets into main repositories after years (or maybe even never)

Closest thing I found was TwisterOS. […] and the fan in my case stops working. Aye-yi-yi!

maybe “TwisterOS” tries to invent air movement by software? it might be a random unrelated incident and the fan is simply broken, it might also be that it enabled some fan control and the fan would start if you only heat up the system enough which might not happen with a lightweight distro and the maybe not cpu consuming programs you use (?). “stress” is a program that could artificially create such cpu consumption for testing (but with a broken fan it might be not a good idea to actively and unnecesarily heat up the cpu, but also cpus usually have failsafe shutdown mechanisms so they dont overheat but that might be like a sudden power down so maybe expect unsaved work to just vanish) another test could be to just give the fan another power source and see what happens, and put abother fan that works in place to see if that changes something

Why are people like this?

Yeah, for newbies I always recommend sticking to the big distros meant for ease of use. Fedora, Ubuntu, Mint, Pop, or openSUSE. Only once you’re familiar would I recommend venturing into the harder and lesser known distros.

Once you pick one of those, you can download a “spin” or “edition” for the desktop environment you want. So, you’d want Lubuntu for Ubuntu+LXQt.

Hey, welcome, fellow noob!

I hopped on the Linux train maybe 20 years ago and haven’t had any non unix system in maybe 15 years.

Also, I don’t know anything much. I can do basic tasks with a Terminal, but I don’t think for example I could install Arch from scratch. Or if I’d accidentally opened VIM, I’d have to kill power to get out again. But I like to tinker. If you like to tinker it’s a big plus, otherwise things, that don’t work instantly, might get frustrating.

As others said, use a pre built distro + DE environment, especially if you don’t really know what you do. Another thing that I’d recommend: a distro that be backed up easily. So you can tinker and start over, if necessary.

If I don’t know, how to fix a thing, I usually look up my question online. The problem with that is: I’ll find solutions containing commands that I don’t know, what they do. I have “fixed” my OS to death before, so it’s always nice to have a recent backup.

Ubuntu is the biggest, although it’s not old-school like win98 and comes with idealistic problems for many people. If you didn’t really enjoy it, I wouldn’t go back, just because it has the biggest community. Community isn’t only about size.

Mint is rock solid, I’ve run that a long time with different DEs.

Another distro, I can’t really recommend (as I haven’t used it further than live USB yet), but might be very interesting for you, is MX Linux. It comes with simple DEs and more importantly: a ton of GUI tools (including a back up tool where you can back up the entire OS including apps and settings as a flash USB).

I don’t know, if I was able to help anything. I just wanted to reassure, that there are (maybe even many) Linux users that don’t really know what they do.

As with many skills in life, I believe, the best way to learn is by just doing it. There will be failures. And each failure is a big opportunity to learn something.

just use zorin. its made to be easy and with loads out of the box and look like windows.

You can install any desktop environment on any distro, but its better to choose one with it preinstalled.

If you want windows 95, maybe try something like linux mint xcfe or xubuntu with the chicago95 theme.

Also if you want ubuntu with a de other than gnome, download one of these.

Linux Mint has already been suggested. I recommend the XFCE edition and adding the Chicago95 theme for a pretty close Windows95/98 look. That should be a reasonable starting point.

1. You dont download software from Websites
2. Use Lubuntu or other variants with LXQt or LXDE, dont do it yourself. They already have done the configs for you

I will let you on a little secret.

The best “support” you can get is support from upstreams directly (I’m involved in both sides of that equation). But upstreams will often only “support” you when you 1. run the latest stable version 2. the upstream source code wasn’t patched willy-nilly by the packager (your distro).

So the best desktop linux experience comes with using rolling distro that gives you such packages, with Arch being the most prominent example.

The acquired knowledge that argues stability and tells you otherwise is a meme.