I am several months into the self-hosting journey and I feel I have outgrown my Pi 4 B 8GB. I’m only running around 3 dozen containerized services and it seems to struggle to keep up. But I’m not sure of the best bang for my buck. I’d like good, long-term performance, but I don’t really have a grand lying around for a Lenovo Tiny or Dell Optiplex or ASUS NUC. I’m thinking of buying an SSD to boot from, but will this even help much? For $350-500, could I make a more cost effective homeserver upgrade?
For me, the small energy footprint of an ARM machine is really important for home usage so I personally went on multiple occasions with Odroid’s offerings and as long as you have a tinkerer’s soul, I can really recommend it.
In that case, I can recommend minicomputer’s like HP EliteDesk G2 800 Mini. You can get them with a variety of intel CPUs, they can take up to 32GB RAM, they have slot for M.2 disks and a regular 2.5" SSD – and they hardly use any power when idle, between 5 to 10 watts, depending on the CPU and CPU governor settings. They are sold used for ~€50 and if you buy newer generations you’ll get even more umpfh for a bit more cash.
In other words, very competetive with the Pi’s, only more available, cheaper and about the same power consumption!
And look better.
I also want to prioritize power consumption just because I can’t afford server rack levels of electricity, so I will have to check that out.
Intel’s low power offerings are sometimes even less power hungry than a RPi and handle more stuff. I like Asrock’s line of CPU-onboard motherboards and use one myself. You get the convenience of a full x86 machine but it sips power. Mine peaks at ~36W with full load on CPU, GPU, RAM and 4 SSDs or disks. Usually it is much much lower. You can always go smaller with an Atom x5 z8300 (~2W Idle without disks or network, 6W with both and some load), but those are getting a little old and newer stuff is better and more feature-rich. Maybe an N100 machine with 4 or 8 gigs of RAM are a good option for you? Don’t go overboard with RAM if you are using docker for everything anyways. I use 8 but 4 would be more than enough for me and my countless containers. I run Nextcloud, Jellyfin, Paperless-ngx, Resilio, Photoprism and a few more. Only the minecraft server benefits from more than four. Very happy with my J5005 board.