I get them out of things
Perfect clip
My feed contains a problem, then the solution immediately after.
I’m rich! Ahahahahha! Fools!
They called me crazy! Who are the ones that are crazy now?!
200% TARIFF FOR YOU
And 50% ON TOP of that for being SASSY about it.
Let me have this small win
It’s not very often some shlub like me can turn 170 hours of work into a cool 30 bucks of pure profit
Im deeply concerned if there’s not a screw bin also.
Rest easy good sir. For it is hex-shaped.
Those are bolts and nuts? Not screws. Where’s the screw bin?
They are clearly screws and machine screws.
That’s crazy. Who keeps all of their screws in just one bin?
Have you ever played with legos? Ever felt the joy of finding that one piece you were looking for?
That exact same thing translates well to screws as well. Not exactly the most efficient way to build stuff, but it is fun as long as you don’t have to search for the right screw a hundred times a day.
Did I say these were all of my screws?
Just toss them anywhere, they’ll end up on that fridge
I have a long metal ruler and I stick on a bunch of ring magnets and run them over the hardwood & carpet. They are amazing for picking up lost screws.
Amazing! Yep I do the same, with the spoils of computer repair, and old tired hard-drives, I’ve got hundreds of uses for strong magnets all over the place.
Where did you get those chunky ones on your lower fridge door?
The big ring magnets on the bottom right are from destroyed larger speakers and suwoofers, mostly salvaged from discarded boomboxes, televisions, etc. The rectangular ones… from various Sony TVs/soundbars/satellites
deleted by creator
I mean. Why would anyone not do this?
there we are then.
Magnets are cool, useful and interesting.
For any pics inters for someone who’s never thought to remove a magnet from a device?
I accidentally replied to the wrong comment!
I hope the pictures show up here…pasting it…
There’s mostly two types you’ll be dealing with
Neodymium solid magnets and ceramic ring magnets
The neodymium magnets are typically in a little metal cap. Most of the time these can be removed by sliding a screwdriver into the gap and twisting… That’s enough to snap it off the adhesive, then you’ll have to dig it out carefully. One time I had to drill a hole in the bottom of the cap and push it out the other way but that was an oddball case
The ring magnets are a little bigger pain in the ass. You will need snippers to cut through the larger but thinner caps… And then they have different plugs and things you’ll have to deal with. There’s a lot of adhesive, and honestly it’s not easy
Once I get them out of the large metal cap, I have been soaking them in lacquer thinner and acetone. Some come off rather easy, others are just a nightmare and they end up shattering along the way. Most of the time, you’ll need a hammer and a socket of suitable size. You’ll press the socket up against the metal, not the magnet, and strike, to shock them apart
The ring magnets are the biggest pain to deal with, and it’s an ongoing process trying to figure out what’s the best way to dissolve the glues. Even 2 weeks in solvent like lacquer thinner or acetone doesn’t really do much. For some of them, it will soften enough that I can separate. Seems to depend on the individual build and glue used
Today I’m trying boiling them for 5 minutes, just to get them up to around 100 C, then putting them in jars of solvent thinking that the expansion/contraction might draw the solvent in and under the adhesive
And Jesus said unto Krudler, “Come with me and I will make you a fisher of magnets.”
